Soil compaction is the process of reducing the size of waste material or soil by means of a compactor. The main compaction equipment available in the light construction equipment market includes three types: plate compactors, jumping jack plate tampers, and road rollers.
Road rollers are used to compact crusher rock for use as a base layer under concrete or stone foundations.
Plate compactors have a vibrator (mechanical) base plate that can be used to create a level surface.
Jack compactors have smaller feet. Jacks are mainly used for compacting backfill in narrow trenches such as water or gas pipelines.
As a supplier of jack jumping tampers, BISON has many years of experience in compaction. Our Jumping tamper will help you compact the ground with the impact force. You can use its continuous impact to level any uneven soil surface and increase its drying strength. Therefore, you will be able to remove air and moisture from the soil.
Unlike most road rollers, our jumping jack rammer tamper does not rely on vibration. Instead, it uses repetitive shocks to get the job done.
BISON offers various models of rammer tampers. With these tampers you can dig trenches, install sewage systems, landscape, compact backfill and secure foundations. Their advantages are ease of operation, durability and performance.
The distinguishing feature of this RM80 is that it is designed for high performance and long life. This compaction process is achieved through high energy and high impact rates combined with boot stroke and fast forward. The feet of the device are first lifted from the ground and then slammed down quickly, compacting to a depth of tens of inches. Meanwhile, our vibratory rammer tamper is perfect for sticky soil shocks with a maximum moisture range of 13%. Its steely composure ensures durability, while its narrow size helps you get into hard-to-reach places like trenches and ditches. In short, this is the must-have piece of equipment for all your construction needs.
The device is simple to operate and easy to set up.
Low emission four-stroke gas engine.
Low oil level protection: If the oil level is low, the unit will not start because the sensor will sense it and prevent it from starting.
For extended life and durability, the engine features an innovative 4-stage air filtration system. To protect the engine during scheduled air filter maintenance, the system includes a last chance filter.
Long service intervals due to the high capacity of the filter
2220 lbs of shock.
About 660 times per minute.
High wear resistance of the guide cylinder due to special material treatment process.
Operators can work long hours due to low arm vibration.
Transport rollers on the handle make loading and storage easy.
Packing and shipping details