BISON 4046lbs(pounds) of tamper plate compactor machines are provided by the 5.5hp samll petrol engine, which is very suitable for terraces, sidewalks, etc. The vibration plate is designed with a 24 inch X 17 inch wooden board, which is a medium -sized tamper plate compactor. Single direction tamper plate compactor is impacted at a vibration frequency of 4750 times per minute, which can compact viscosity and granular soil as high as 17 inches. For large -scale paving projects, this tamper plate compactor is almost a perfect solution.
Heavy shock absorber can provide vibration isolation in components and engines to prevent components from wear and reduce operator fatigue.
Tough and wear -resistant ball cast iron bottom plates can provide durability and impact resistance.
The direct handle installed in the center can provide excellent mobility, which can simplify it to a few inches of the distance between the distance, so as to operate the board under obstacles and forms.
At the same time, it can withstand high -strength wear aluminum components to reduce the weight of tamper plate compactor.
Using a large -capacity polyethylene water tank, there is a large filter in the water tank, which can prevent blocking during surgery, and it is easy to disassemble to clean and drain.

In order to provide a full support foundation, proper soil compacking must be performed. When the compaction is insufficient, the soil hole is large and the density is very low. Because large holes effectively help water through the soil, the penetration rate and drainage rate of soil will increase. But this also causes soil to move, contraction or expansion unevenness, thereby sinking and destructive structures.
However, by proper compaction, soil particles are compressed well, and the pores between them are small. This helps to form higher soil density, larger hole rates and more uniform surfaces. When the soil is more compact, it will help prevent structural destruction and more stable.