How to Use BISON Gasoline Two-stroke Brush Cutter Correctly

Do you need a powerful brush cutter to tackle those overgrown areas of your yard? The BISON petrol two-stroke brush cutter is right for you, it is meticulously designed for optimal efficiency and performance, making them the ultimate garden tools for keeping your landscape impeccably organized. In this blog, we will guide you on how to properly use our brush cutters to ensure optimal results and longevity.

Gasoline Two-Stroke Engines

To fully grasp the usage method of a petrol brush cutter, it's crucial to familiarize yourself with the mechanics of a two-stroke engine.Unlike four-stroke engines, two-stroke engines require only two strokes of the piston to complete the power cycle, allowing for a compact and lightweight design. That means more power in a smaller package, giving our brush cutters impressive cutting capabilities.

Preparatory measures before using BISON two-stroke brush cutter

To fully grasp the usage method of a brush cutter, it's essential to first grasp the mechanics of a two-stroke engine. Safety is always a top priority, so be sure to wear protective gear like goggles, gloves, and sturdy shoes. Also, inspect the brush cutter for any damaged or loose parts before each use.

Fuel is the lifeblood of any engine, and two-stroke engines have specific fuel requirements. Using high-quality gasoline and the correct fuel mixture ratio is crucial. Consult your brush cutter manual to determine the exact fuel ratio BISON recommends. Using the wrong fuel mixture can cause engine damage and reduced performance.

Start two-stroke brush cutter

Once you have taken the necessary safety precautions and ensured the correct fuel mixture, it is time to start your BISON brush cutter machine. Use the following step-by-step instructions below to start 2 stroke brush cutter:

• Place the brush cutter on a flat surface and make sure it is stable and secure.

• Set the choke lever to the "open" position.

• Depending on your mower model, you may need to prime the fuel system by pressing the fill bulb or by pressing the fill button.

• To prevent accidental starting, enable the throttle lockout feature (if available on your mower). This will keep the throttle at idle until you are ready to start cutting.

• Grasp the starter cord handle firmly and give a quick pull. Feel the resistance of the engine cylinders as they compress the fuel-air mixture, then release the cord handle. Repeat this process as necessary until the engine starts.

• Once the engine starts, release the throttle lockout and allow the engine to warm up for a few minutes before cutting.

If you have trouble starting your brush cutter, check the fuel level, spark plugs, and air filter. These components can sometimes cause startup problems and may need to be cleaned or replaced.

Operating skills

Now that your brush cutter is up and running, it's time to put it to work. To achieve optimal outcomes, adhere to these recommendations:

Adjust the throttle according to the density of vegetation you are cutting. To start, use low throttle for shallow grass; increase throttle as needed for thicker vegetation.

Keep the brush cutter parallel to the ground for an even cutting height. This ensures an even cut and prevents scalping.

Move at a steady speed and avoid overloading the engine. Pushing too hard can stress the engine and cause premature wear.

Always use the correct fuel mixture for optimum performance. Using an incorrect ratio could result in engine damage and void the warranty.

By following these operating tips, you will maximize the efficiency and life of your BISON gasoline two-stroke brush cutter.

In short

Proper use of a 2 stroke gasoline brush cutter is essential for good results and long equipment life. By wearing the proper protective gear, using the correct fuel mixture and following our step-by-step instructions for starting and operating your brush cutter, you'll ensure a safe and productive cutting experience.

Wholesalers looking to purchase high quality two-stroke brush cutters can rely on BISON to provide a top-notch product. Our brush cutters are built to handle the toughest tasks and deliver exceptional performance. Trust BISON for all your brush cutter needs and let us help you maintain your beautifully manicured landscape.